Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN buses. It's discreet, doesn't use keys or LEDs and is hidden within the wiring of the vehicle.
The user can also deactivate the system temporarily by using Transport Mode when renting their vehicle. This guide will walk you through the steps of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle from key cloning, hacking and relay attacks. The system is directly connected to your car's ECU and is protected by a unique PIN code that you choose. It is inaccessible to thieves using diagnostic scanners or other advanced methods. It cannot be disabled with circuit cuts.
The system is simple to use, however it is essential to have a professional installation to ensure a smooth and secure connection with your vehicle's ECU. An approved installer from Thatcham can assist with the installation and programming of your Ghost system. They can also recommend a tracking or alarm system to complete the protection package for your vehicle.
To avoid an accidental deployment of short circuits or airbags, the installer must first remove your battery. Once this is done the installer is now able to begin work. Basic hand tools can be used to make precise connections. A multimeter can be used to check electrical values. Cable tie and insulation tape are vital to secure connections and ensure that wiring is neat. The Ghost Immobiliser user's guide will give specific instructions that are tailored to your model.
During the installation process, it's crucial to select a grounding point that's free of paint and debris. The installer should be sure that the immobiliser's CAN H and CAN L wires are connected to the correct ports on your vehicle's ECU. The wires can be plugged into or soldered based on the model. To ensure a stable and long-lasting connection it is recommended you choose a high-quality plug.
Transport Mode can be turned on by the client after the installation is complete. This allows mechanics or valet parking to use the vehicle, without having to know the pin code. The customer has to press the service icon on the dashboard five times over two seconds. The system will confirm this by showing five indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA verified and Thatcham approved. It's an excellent option for anyone who regularly rents out their vehicles on platforms such as Turo. An immobiliser can lower insurance costs since it reduces the likelihood of theft.
Getting Started
You won't have a problem with an autowatch ignition device for those who want to safeguard your car from thieves. The device prevents your vehicle from starting even if someone steals or copies your key. It's possible because of its advanced technology that prevents the engine from starting until the right PIN code has been entered.
ghost 2 immobiliser review by connecting to the vehicle's CAN bus network which allows it to communicate with the ECU directly. It uses existing buttons on the dashboard and steering wheel to create a unique sequence only you can identify and makes it impossible for someone else to start your car. This is the best security system that will safeguard your most precious possessions, keeping its value intact in the event that you decide to sell it in the future.
Installing Ghost's immobiliser is straightforward however, you must follow the steps to avoid electrical problems and malfunctions of the system. You'll need to locate a power supply of 12V and a suitable grounding for the chassis of your car. Then, you'll be able to begin connecting the wires to the immobiliser. Make use of high-quality connectors and soldering techniques for a secure connection. Also, be sure to cover the connections by using heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other issues.
Once the wires are connected, you can plug in the battery and begin the engine to check if the immobiliser is working. When everything is functioning correctly, you can install it in a secure place under the dash or elsewhere in the vehicle. Make sure you hide it properly to stop thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified this means it is in compliance with the highest standards of security and is an excellent protection against car thieves. It offers superior protection against key cloning, hacking and relay attacks, and isn't able to be disabled unless you know the code. The device is simple to use, and can be set to the service valet setting to ensure that your vehicle will not be activated if you take it for an MOT or service.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to stop theft of vehicles. It communicates with your vehicle's ECU and connects directly to the CAN bus. Contrary to other aftermarket systems which require the removal of circuit components the Ghost Immobiliser won't interfere with your vehicle's factory settings.
The system is also undetectable by thieves using diagnostic scanners. The system does not send or receive radio frequency signals but instead uses CAN data to communication with your ECU. It also doesn't require modifications to your existing key fobs.
To utilize the Ghost Immobiliser, simply switch on the ignition of your car and enter your disarm sequence (either one or two buttons). The indicator will flash two times to confirm that you've entered the correct code. After that, you are able to start your car and drive away with peace of mind.
Once installed Once installed, the Ghost Immobiliser will protect your car from key cloning and hacking and will also protect the value of your most prized possession. If you ever have to surrender your vehicle to valet parking or for service, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll have to locate the source of power that is constant (12V) and a grounding point. Ensure that these are both well-insulated and safe to touch. Cable ties are also recommended for bundling and securing the wires. This will reduce the risk of theft by thieves. To avoid committing mistakes, double-check these points and mark them using the use of tape or labels. Verify all connections for signs they're getting worn out. Make sure all connections are firmly in place, and properly sealed. Don't forget to test the Ghost Immobiliser after the installation is complete. This will make sure that the unit functions properly and that all connections and insulation are secure. If there are any issues, make certain to fix them immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your car's ECU in order to prevent unauthorised motor starting. Its innovative technology protects your car against key cloning, hacking, and other typical tactics thieves employ to steal vehicles. The Ghost is also able to work in conjunction with other alarm and tracking systems to provide the most complete protection for your vehicle. The Ghost's unmatched features, coupled with its secluded design makes it a sought-after choice for car enthusiasts as well as security-conscious drivers.
To ensure the proper integration of the Ghost Immobiliser, it is essential to follow every step of the installation process. ghost 2 immobiliser review starting point is to consult the wiring diagram of your vehicle, which will serve as a roadmap for locating and connecting the required wires. You'll need to determine the power and grounding sources. Once you've identified these then you'll be required to mark them so that they are easy to locate when installing. It's essential to use high-quality materials and tools. Basic hand tools will help you make precise connections. A multimeter can verify electrical values and guarantee security. Cable ties and insulation tape can help keep connections neat and tidy. Also, a user's guide will provide specific guidance specifically tailored to your Ghost model.
Before you begin installing it is essential to test the system by entering the PIN code and starting the vehicle. This will ensure that the immobiliser works in the way it was intended, preventing unauthorized vehicle starts. This procedure should be carried out regularly as part of your routine vehicle inspections in order to ensure the system is working properly.
Once the installation has been completed, you can start driving your vehicle with confidence. The Ghost will safeguard your vehicle from would-be car thieves. It will ensure that no one is able to take your car away without having the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that detects any attempts at theft or tampering. This will allow you to track your vehicle if it is stolen.
The Ghost can be utilized on a wide range of vehicles and is compatible with most major manufacturers. If you are interested in securing your car with this cutting-edge device, call Monty's Locksmith today to learn more about our installation and service options. We are a TASSA Registered installer This certification ensures that we adhere to the strictest guidelines and procedures for installing our products. This assures customers, insurance companies and law enforcement agencies that all installations are completed in a safe and correct manner.